City
of hobart
MINUTES
City Planning Committee Meeting
Open Portion
Monday, 30 August 2021 5:00pm
|
Minutes (Open Portion) City Planning Committee Meeting |
Page 2 |
|
30/8/2021 |
|
APOLOGIES AND LEAVE OF ABSENCE
1. Co-Option of a Committee Member in the event of a vacancy
3. Consideration of Supplementary Items
4. Indications of Pecuniary and Conflicts of Interest
6. Planning Authority Items - Consideration of Items with Deputations
7. Committee Acting as Planning Authority
7.1 Applications under the Hobart Interim Planning Scheme 2015
7.1.3 7 Hadley Court, Lenah Valley and Adjacent Road Reserve - Two Multiple Dwellings
7.1.4 34 Wellesley Street, South Hobart - Partial Demolition and Ancillary Dwelling
8.1 Delegated Decision Report (Planning)
8.2 City Planning - Advertising Report
9. Committee Action Status Report
9.1 Committee Actions - Status Report
11. Closed Portion of the Meeting
|
Minutes (Open Portion) City Planning Committee Meeting |
Page 3 |
|
30/08/2021 |
|
City Planning Committee Meeting (Open Portion) held on Monday, 30 August 2021 at 5:00 pm in the Council Chamber, Town Hall.
This meeting of the City Planning Committee is held in accordance with a Notice issued by the Premier on 3 April 2020 under section 18 of the COVID-19 Disease Emergency (Miscellaneous Provisions) Act 2020.
The title Chief Executive Officer is a term of reference for the General Manager as appointed by Council pursuant s.61 of the Local Government Act 1993 (Tas).
COMMITTEE MEMBERS Deputy Lord Mayor Burnet (Chairman) Briscoe Harvey Behrakis Dutta Coats
PRESENT: The Deputy Lord Mayor Councillor H Burnet (Chairman), Alderman J R Briscoe, Councillor W F Harvey, Alderman S Behrakis, Councillors M Dutta and W Coats.
APOLOGIES: Nil.
LEAVE OF ABSENCE: Nil.
|
NON-MEMBERS Lord Mayor Reynolds Zucco Sexton Thomas Ewin Sherlock
Alderman Briscoe left the meeting at 6.56pm, returning at 6.57pm and did not vote on items 7.1.4 and 8.1.
Alderman Behrakis left the meeting at 5.37pm, returning at 5.40pm.
Councillor Dutta left the meeting at 6.48pm, returning at 6.51pm. |
No Elected Members were co-opted to the Committee.
DUTTA
|
||||||||||||||
The minutes of the Open Portion of the City Planning Committee meeting held on Monday, 16 August 2021 and the Special City Planning Committee meeting held on Monday, 23 August 2021, be confirmed as an accurate record.
|
||||||||||||||
MOTION CARRIED VOTING RECORD
|
The minutes were signed.
Ref: Part 2, Regulation 8(6) of the Local Government (Meeting Procedures) Regulations 2015.
That the Committee resolve to deal with any supplementary items not appearing on the agenda, as reported by the Chief Executive Officer.
No supplementary items were received.
|
Ref: Part 2, Regulation 8(7) of the Local Government (Meeting Procedures) Regulations 2015.
Members of the Committee are requested to indicate where they may have any pecuniary or conflicts of interest in respect to any matter appearing on the agenda, or any supplementary item to the agenda, which the Committee has resolved to deal with.
No interest was indicated.
Regulation 15 of the Local Government (Meeting Procedures) Regulations 2015.
A Committee may close a part of a meeting to the public where a matter to be discussed falls within 15(2) of the above regulations.
In the event that the Committee transfer an item to the closed portion, the reasons for doing so should be stated.
Are there any items which should be transferred from this agenda to the closed portion of the agenda, or from the closed to the open portion of the agenda?
No items were transferred.
In accordance with the requirements of Part 2 Regulation 8(3) of the Local Government (Meeting Procedures) Regulations 2015, the Chief Executive Officer is to arrange the agenda so that the planning authority items are sequential.
In accordance with Part 2 Regulation 8(4) of the Local Government (Meeting Procedures) Regulations 2015, the Committee by simple majority may change the order of any of the items listed on the agenda, but in the case of planning items they must still be considered sequentially – in other words they still have to be dealt with as a single group on the agenda.
Where deputations are to be received in respect to planning items, past practice has been to move consideration of these items to the beginning of the meeting.
BEHRAKIS
That in accordance with Regulation 8(4) of the Local Government (Meeting Procedures) Regulations 2015, the Committee resolve to deal with any items which have deputations by members of the public regarding any planning matter listed on the agenda, to be taken out of sequence in order to deal with deputations at the beginning of the meeting.
MOTION CARRIED
VOTING RECORD
AYES |
NOES |
Deputy Lord Mayor Burnet |
|
Briscoe |
|
Harvey |
|
Behrakis |
|
Dutta |
|
Coats |
|
|
Minutes (Open Portion) City Planning Committee Meeting |
Page 47 |
|
30/08/2021 |
|
In accordance with the provisions of Part 2 Regulation 25 of the Local Government (Meeting Procedures) Regulations 2015, the intention of the Committee to act as a planning authority pursuant to the Land Use Planning and Approvals Act 1993 is to be noted.
In accordance with Regulation 25, the Committee will act as a planning authority in respect to those matters appearing under this heading on the agenda, inclusive of any supplementary items.
The Committee is reminded that in order to comply with Regulation 25(2), the Chief Executive Officer is to ensure that the reasons for a decision by a Council or Council Committee acting as a planning authority are recorded in the minutes.
7.1 Applications under the Hobart Interim Planning Scheme 2015
Ms Iris Iwanicki and Mr Adam Wallace addressed the Committee in relation to item 7.1.1.
7.1.1 251 Macquarie Street and 245-247 Macquarie Street, Hobart - Three Multiple Dwellings (Two Existing, One New) |
||||||||||||||
BEHRAKIS
|
||||||||||||||
That the recommendation contained in the report of the Development Appraisal Planner and the Senior Statutory Planner of 24 August 2021, be adopted, as amended with a revised clause 4 in condition HER 6 to read as follows: “HER 6 4. All features and/or deposits discovered and excavated must
be photographed and reported to Council within 1 day
and prior to
the conclusion of
the excavation; and”
|
||||||||||||||
MOTION CARRIED VOTING RECORD
|
||||||||||||||
COMMITTEE RESOLUTION: |
||||||||||||||
That pursuant to the Hobart Interim Planning Scheme 2015, the City Planning Committee, in accordance with the delegations contained in its terms of reference, approve the application for three multiple dwellings (two existing, one new) at 251 Macquarie Street and 245247 Macquarie Street, Hobart 7000 for the reasons outlined in the officer’s report attached to item 7.1.1 of the Open City Planning Committee agenda of 30 August 2021 and a permit containing the following conditions be issued:
GEN
The use and/or development must be substantially in accordance with the documents and drawings that comprise PLN21245 251 MACQUARIE STREET HOBART TAS 7000 Final Planning Documents except where modified below.
Reason for condition
To clarify the scope of the permit.
TW
The use and/or development must comply with the requirements of TasWater as detailed in the form Submission to Planning Authority Notice, Reference No. TWDA 2021/00623HCC dated 30/04/2021 as attached to the permit.
Reason for condition
To clarify the scope of the permit.
THC
The use and/or development must comply with the requirements of the Tasmanian Heritage Council as detailed in the Notice of Heritage Decision, THC Works Ref: 6542 dated 4 August 2021, as attached to the permit.
Reason for condition
To clarify the scope of the permit.
PLN s1
The constructed dwelling must be substantially in accordance with the Final Planning Documents and have a maximum height of no more than 10m above existing ground level, to be clearly demonstrated in any plans submitted for approval pursuant to the Building Act 2016.
Reason for condition
To ensure the proposal is compliant with the height limit of the Urban Mixed Zone.
ENG sw1
All stormwater from the proposed development (including but not limited to: roofed areas, ag drains, and impervious surfaces such as driveways and paved areas) must be drained to the Council’s stormwater infrastructure prior to first occupation or commencement of use (whichever occurs first).
Reason for condition
To ensure that stormwater from the site will be discharged to a suitable Council approved outlet.
SW 1
Prior to the issue of any approval under the Building Act 2016 or the commencement of work on the site (whichever occurs first), a pre construction condition assessment and visual record (eg video and photos) of the rivulet bank adjacent to the proposed development must be submitted to the City of Hobart as a Condition Endorsement.
The condition assessment must include a site plan clearly showing the location of the images.
The preconstruction condition assessment will be relied upon to establish the extent of any damage caused to Hobart City Council’s stormwater infrastructure during construction. If the owner/developer fails to provide the City of Hobart with an adequate preconstruction condition assessment then any damage to the City of Hobart’s infrastructure identified in the post construction condition assessment will be the responsibility of the owner/developer.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
SW 2
Prior to occupancy or the commencement of the approved use (whichever occurs first), a postconstruction structural condition assessment and visual record (eg video and photos) of the rivulet bank adjacent to the proposed development must be submitted to the City of Hobart.
The condition assessment must include a site plan clearly showing the location of the images.
The postconstruction condition assessment will be relied upon to establish the extent of any damage caused to the Hobart City Council’s stormwater infrastructure during construction. If the owner/developer fails to provide the City of Hobart with an adequate postconstruction condition assessment then any damage to the Hobart City Council’s infrastructure identified in the postconstruction CCTV will be deemed to be the responsibility of the owner/developer.
SW 3
The proposed works must be designed and installed to ensure the protection of and access to the bank of the Hobart Rivulet.
Prior to the issuing of any approval under the Building Act 2016 or commencement of works (whichever occurs first), a detailed design must be submitted and approved. The detailed design must be prepared by a suitably qualified expert and must:
1. demonstrate how the design will ensure the protection of and provide access to the bank of the Hobart Rivulet;
2. show footings adjacent to the Rivulet extending to bedrock or below the invert of the Rivulet (whichever is less);
3. detail how removable elements within the 5m Rivulet setback (eg decks and window shrouds) are dismantled; and
4. detail landscaping and vegetation within the 5m Rivulet setback, sufficient to stabilise the bank.
All work required by this condition must be undertaken and maintained in accordance with the approved detailed design.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Council considers creek meander to be a natural process and will not install erosion control measures to protect private property.
ENG 2a
Prior to first occupation or commencement of use (whichever occurs first), vehicular barriers compliant with the Australian Standard AS/NZS 1170.1:2002 must be installed to prevent vehicles running off the edge of an access driveway or parking module (parking spaces, aisles and manoeuvring area) where the drop from the edge of the trafficable area to a lower level is 600mm or greater, and wheel stops (kerb) must be installed for drops between 150mm and 600mm. Barriers must not limit the width of the driveway access or parking and turning areas approved under the permit.
Advice:
The Council does not consider a slope greater than 1 in 4 to constitute a lower level as described in AS/NZS 2890.1:2004 Section 2.4.5.3. Slopes greater than 1 in 4 will require a vehicular barrier or wheel stop.
Designers are advised to consult the National Construction Code 2016 to determine if pedestrian handrails or safety barriers compliant with the NCC2016 are also required in the parking module this area may be considered as a path of access to a building.
Reason for condition
To ensure the safety of users of the access driveway and parking module and compliance with the standard.
ENG 2b
Prior to the issue of any approval under the Building Act 2016 or the commencement of works on site (whichever occurs first), a certified vehicle barrier design (including site plan with proposed location(s) of installation) prepared by a suitably qualified engineer, compliant with Australian Standard AS/NZS 1170.1:2002, must be submitted to Council as a Condition Endorsement.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Reason for condition
To ensure the safety of users of the access driveway and parking module and compliance with the standard.
ENG 2c
Prior to the first occupation, vehicular barriers must be inspected by a qualified engineer and certification submitted to the Council confirming that the installed vehicular barriers comply with the certified design and Australian Standard AS/NZS 1170.1:2002.
Advice:
Certification may be submitted to the Council as part of the Building Act 2016 approval process or via condition endorsement (see general advice on how to obtain condition endorsement)
Reason for condition
To ensure the safety of users of the access driveway and parking module and compliance with the relevant standards.
ENG 3a
The access driveway, and parking module (parking spaces, aisles and manoeuvring area) must be designed and constructed in accordance with Australian Standard AS/NZS 2890.1:2004 (including the requirement for vehicle safety barriers where required), or a Council approved alternate design certified by a suitably qualified engineer to provide a safe and efficient access, and enable safe, easy and efficient use.
Advice:
It is advised that designers consider the detailed design of the access and parking module prior to finalising the Finished Floor Level (FFL) of the parking spaces (especially if located within a garage incorporated into the dwelling), as failure to do so may result in difficulty complying with this condition.
Reason for condition
To ensure the safety of users of the access and parking module, and compliance with the relevant Australian Standard.
ENG 3c
The access driveway, and parking module (parking spaces, aisles and manoeuvring area) must be constructed in accordance with the Hive Building Design documentation received by the Council on the 18th June 2021.
Prior to the first occupation, documentation by a suitably qualified engineer certifying that the access driveway and parking module has been constructed in accordance with the above drawings must be lodged with Council.
Advice:
Certification may be submitted to Council as part of the Building Act 2016 approval process or via condition endorsement (see general advice on how to obtain condition endorsement)
Reason for condition
To ensure the safety of users of the access and parking module, and compliance with the relevant Australian Standard.
ENG 4
The access driveway and parking module (car parking spaces, aisles and manoeuvring area) approved by this permit must be constructed to a sealed standard (spray seal, asphalt, concrete, pavers or equivalent Council approved) and surface drained to the Council's stormwater infrastructure prior to the first occupation.
Reason for condition
To ensure the safety of users of the access driveway and parking module, and that it does not detract from the amenity of users, adjoining occupiers or the environment by preventing dust, mud and sediment transport.
ENG 5
The carparking space identified as open car space (3) must be delineated by means of white or yellow lines 80mm to 100mm wide, or white or yellow pavement markers in accordance with Australian Standards AS/NZS 2890.1 2004, prior to first occupation.
Advice:
The carparking space identified as open car space (3) is the car parking space allocated to the existing one bedroom apartment at 2/251 Macquarie Street.
Reason for condition
To ensure the provision of parking for the use is safe and efficient.
ENG 1
Any damage to council infrastructure resulting from the implementation of this permit, must, at the discretion of the Council:
1. Be met by the owner by way of reimbursement (cost of repair and
reinstatement to be
paid by the
owner to the
Council); or 2. Be repaired and reinstated by the owner to the satisfaction of the Council.
A photographic record of the Council's infrastructure adjacent to the subject site must be provided to the Council prior to any commencement of works.
A photographic record of the Council’s infrastructure (e.g. rivulet bank, existing property service connection points, roads, buildings, stormwater, footpaths, driveway crossovers and nature strips, including if any, preexisting damage) will be relied upon to establish the extent of damage caused to the Council’s infrastructure during construction. In the event that the owner/developer fails to provide to the Council a photographic record of the Council’s infrastructure, then any damage to the Council's infrastructure found on completion of works will be deemed to be the responsibility of the owner.
Reason for condition
To ensure that any of the Council's infrastructure and/or siterelated service connections affected by the proposal will be altered and/or reinstated at the owner’s full cost.
ENV 2
The Hobart Rivulet must be protected during construction.
Sediment and erosion control measures, sufficient to prevent sediment leaving the site or erosion of the rivulet and in accordance with an approved soil and water management plan (SWMP), must be installed prior to the commencement of work and maintained until such time as all disturbed areas have been stabilised and/or restored or sealed to the Council’s satisfaction.
A SWMP must be submitted for condition endorsement (CEP application) prior to the issue of any approval under the Building Act 2016 or the commencement of work, whichever occurs first. The SWMP must:
a) be
prepared in accordance with the Soil
and Water Management on Building and Construction Sites fact sheets (Derwent Estuary Program, 2008), available here; and b) show measures to protect the rivulet bank from construction works,
including but not limited to heavy machinery exclusion zones; and c) detail vegetation reinstatement and embankment stabilisation as per condition SW3.
All work required by this condition must be undertaken in accordance with the approved SWMP.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Reason for condition
To avoid the pollution and sedimentation of roads, drains and natural watercourses that could be caused by erosion and runoff from the development.
HER 6
All onsite excavation and disturbance in the areas identified in the 251 Macquarie St, Hobart, Development Works Statement of Historical Archaeological Potential and Archaeological Method Statement (dated 12 March 2021) must be monitored and excavated in accordance with section 10, and 11 of the report. Should any features or deposits of an archaeological nature be discovered on the site during excavation or disturbance:
1. All excavation and/or disturbance must stop immediately; and 2. A qualified archaeologist must be engaged to attend the site and provide advice
and assessment of the features and/or deposits
discovered and make recommendations on further excavation and/or disturbance; and 3. All
and any recommendations made by the
archaeologist engaged in accordance with section 10 and 11 of
the Southern Archaeology report must be complied with in full; and 4. All
features and/or deposits discovered and excavated must be photographed and reported to Council within 1 day
and prior to
the conclusion of
the excavation; and 5. A copy of the archaeologist's advice, assessment and recommendations obtained in accordance with sections 10 and 11 of the Southern Archaeology report must be provided to Council within 60 days of receipt of the advice, assessment and recommendations and prior to the issue of a certificate of occupancy. Excavation and/or disturbance must not recommence until approval is granted from the Council.
Excavation and/or disturbance must not recommence until approval is granted from the Council.
Reason for condition
To ensure that work is planned and implemented in a manner that seeks to understand, retain, protect, preserve and manage significant archaeological evidence.
HER 17a
The use of the colour 'Wallaby' is not approved. A lighter colour is required. The palette of exterior colours, materials and finishes must reflect the palette of materials within the local area and precinct. The following Colorbond colours would be acceptable: Dune, Shale Grey or Surfmist.
Prior to the issue of any approval under the Building Act 2016, revised plans must be submitted and approved as a Condition Endorsement showing revised colours, materials and finishes in accordance with the above requirement.
All work required by this condition must be undertaken in accordance with the approved plans.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Reason for condition
To ensure that development at a heritage place and heritage precinct is undertaken in a sympathetic manner which does not cause loss of historic cultural heritage significance.
HER 20
A landscaping plan must be prepared with work undertaken within six (6) months of the issue of certificate of occupancy.
A landscaping plan must be submitted and approved as a Condition Endorsement, prior to the commencement of work. The landscape plan must:
1. show species of trees and shrubs proposed, and locations, and other finishes, and structures, for outdoors areas.
All work required by this condition must be undertaken in accordance with the approved landscaping plan.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Reason for condition
To ensure that development at a heritage place is undertaken in a sympathetic manner which does not cause loss of historic cultural heritage significance.
ADVICE
The following advice is provided to you to assist in the implementation of the planning permit that has been issued subject to the conditions above. The advice is not exhaustive and you must inform yourself of any other legislation, bylaws, regulations, codes or standards that will apply to your development under which you may need to obtain an approval. Visit the Council's website for further information.
Prior to any commencement of work on the site or commencement of use the following additional permits/approval may be required from the Hobart City Council.
CONDITION ENDORSEMENT
If any condition requires that further documents are submitted and approved, you will need to submit the relevant documentation to satisfy the condition via the Condition Endorsement Submission on Council's online services eplanning portal. Detailed instructions can be found here.
A fee of 2% of the value of the works for new public assets (stormwater infrastructure, roads and related assets) will apply for the condition endorsement application.
Once approved, the Council will respond to you via email that the condition has been endorsed (satisfied).
Where building approval is also required, it is recommended that documentation for condition endorsement be submitted well before submitting documentation for building approval. Failure to address condition endorsement requirements prior to submitting for building approval may result in unexpected delays.
BUILDING PERMIT
You may need building approval in accordance with the Building Act 2016. Click here for more information.
This is a Discretionary Planning Permit issued in accordance with section 57 of the Land Use Planning and Approvals Act 1993.
PLUMBING PERMIT
You may need plumbing approval in accordance with the Building Act 2016, Building Regulations 2016 and the National Construction Code. Click here for more information.
STORM WATER
Please note that in addition to a building and/or plumbing permit, development must be in accordance with the Hobart City Council’s Infrastructure By law. Click here for more information.
IMPACT ON EXISTING PERMIT ON ADJOINING PROPERTY
There are existing planning permits for 245 Macquarie Street (PLN160011601, PLN21195). This planning permit for 251 Macquarie Street (PLN21245) may impact on the existing planning permit for 245 Macquarie Street requiring alterations to the levels to facilitate onsite turning. Which ever planning permit is acted on first may compromise the ability for the other planning permit to be acted upon therefore it is encouraged that the developer liaises withe adjoining owners. Alterations to driveway and turning areas may require subsequent planning approvals or amendments.
RIGHT OF WAY
The private right of way must not be reduced, restricted or impeded in any way, and all beneficiaries must have complete and unrestricted access at all times.
You should inform yourself as to your rights and responsibilities in respect to the private right of way particularly reducing, restricting or impeding the right during and after construction.
FEES AND CHARGES
Click here for information on the Council's fees and charges.
DIAL BEFORE YOU DIG
Click here for dial before you dig information.
|
Delegation: Committee
Mr David Westmore, Mr Nick Sawyer, Ms Jane Wilson (Representors) and Mr John Fisher (Applicant) addressed the Committee in relation to item 7.1.2.
7.1.2 100 Pinnacle Road, Mount Wellington - New and Upgraded Shared Use and Mountain Bike Tracks and Associated Works |
||||||||||||||
BEHRAKIS
|
||||||||||||||
That the recommendation contained in the report of the Development Appraisal Planner and the Senior Statutory Planner of 20 August 2021, be adopted, as amended by the addition of the following advice clause: “ADVICE: Consideration be given to ways of managing the speed of mountain bikers entering O’Grady’s Falls Fire Trail from the new Free Wheel’n’ bike trail.”
|
||||||||||||||
MOTION CARRIED VOTING RECORD
|
||||||||||||||
COMMITTEE RESOLUTION: |
||||||||||||||
That pursuant to the Hobart Interim
Planning Scheme 2015, the City Planning
Committee, in accordance with the delegations contained in its terms of
reference, approve
the application for new and upgraded shared use and
mountain bike
tracks and associated works, at 100 Pinnacle Road, Mount
Wellington 7054 for the reasons
outlined in the officer’s report attached to item 7.1.2 of the Open City
Planning Committee agenda of 30 August 2021 and a permit containing
the following conditions be issued: GEN The use and/or
development must be substantially in accordance with
the documents and drawings that comprise PLN21302 100
PINNACLE ROAD MOUNT WELLINGTON TAS 7054 Final Planning Documents except
where modified below. Reason for condition To clarify
the scope of the permit. ENV 8 Prior to the removal
of any tree with a diameter
at breast height of >700mm, the advice
of a suitably qualified person must be obtained with regard to the
impact on slope
stability. Any recommended advice with regard to
maintaining slope stability must be implemented. Reason for condition To protect
life, property and land, and to minimse the need for remedial works ENV 9 No works for
the ‘Rocky Wheel’n’ and
‘Free Wheel’n’ tracks
may encroach more than
10% into the
tree protection zones
of the following trees, as determined using Australian Standard AS 49702009 Protection of trees on
development sites, without
the prior written consent of the planning authority: · Trees with a diameter at breast height of >100cm in the areas mapped as
WOB or WRE in Figure
2 of the Natural
Values Assessment by Enviro
Dynamics (Rocky Wheelin’ MTB track) dated
July 2020. · Trees with a diameter at breast height of >70cm in the area mapped as
DOB in Figure
2 of the Natural Values
Assessment by EnviroDynamics (Rocky Wheelin’ MTB track) dated July 2020. · Trees identified as old growth trees in Figure 2 of the Natural ValuesAssessment by EnviroDynamics (Rocky Wheelin’ MTB track) dated July 2020.
Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes. ENV 10 No works for
the ‘Skid Road’ and ‘Upper Luge’ tracks may encroach more than 10%
into the tree
protection zones of
the following trees,
as determined using Australian Standard AS 49702009 Protection of trees on development
sites, without the prior
written consent of the planning authority: · Trees with
a diameter at breast
height of >100cm. · Trees identified as large or old growth trees in Figure 2 of the Natural Values Assessment by
EnviroDynamics (Upper Luge MTB tracks) dated July
2020. · Blue gums (Eucalyptus globulus) with a diameter at breast height of >40cm.
Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes. ENV 11
Clearing of native vegetation and soil disturbance must not exceed a 2m wide strip along the track route, except where associated with an approved borrow pit or where the vegetation has been assessed as an unacceptable safety risk for users of the track by a suitably qualified person using an accepted bestpractice assessment methodology (e.g. QTRA, VALID) but excluding those trees specified in conditions ENV 9 and ENV 10.
Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes. ENV 12
Reason for condition To conserve flora, fauna, geological values, and to protect natural processes.
ENV 14 Coarse woody debris
must not be removed from
the Park. Reason for condition
To conserve flora, fauna, geological values, and to protect natural processes.
ENV 15 The individuals of holly (Ilex aquifolium) and forgetmenot (Myosotis sp.)
identified in the Natural Values Assessment by
EnviroDynamics (Rocky Wheelin’ MTB
track) and the
Natural Values Assessment by EnviroDynamics
(Upper Luge MTB
tracks) dated July
2020 must be
removed as part
of the construction works
and disposed of
to a waste disposal facility. Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes. ENV 16 No soil is to be imported onto the site unless determined as being free of weed
propagules when tested in accordance with AS 4419 Soils for
Landscaping and Garden Use. Reason for condition To minimise
the spread of weeds. ENV 2 Prior to the commencement of works, a CEMP must be submitted and approved as a
Condition Endorsement. The CEMP must: · detail
the proposed construction methodology (particularly where works may have environmental
impacts); · identify all potential environmental impacts associated with the works
including (as relevant) noise, odours, air pollution, water pollution, land
contamination, erosion, land instability, changes to hydrology, habitat
degradation and impacts upon flora and fauna; and · include measures to adequately avoid or mitigate all identified
environmental risks. To be approved, the CEMP
must: · specify that works
will progress from the upslope ends of the tracks to the
downslope ends of the tracks; · include
measures to ensure
that works will
not encroach by
more than 10% into
the tree protection zones of the
trees specified in
conditions ENV 9 and ENV 10. · include soil and water
management measures, particularly near
watercourse crossings; · include measures to ensure the risk of rockfall is acceptable during
construction works, and following completion of the works; · include weed and pathogen
hygiene measures; and · include specifications that demonstrate compliance with environmental
conditions ENV 8, ENV 11, ENV 12, ENV 14, ENV 15, ENV 16, ENV s1, ENV s2 and ENV s3. Advice:
This condition requires further information to be
submitted as a Condition
Endorsement. Refer to the Condition Endorsement advice at the end
of this permit. Reason for condition To minimise the potential for environmental impacts from the construction works
ENV s1
If evidence of raptor nesting, swift parrot nesting or marsupial denning is
observed within
20m of the track alignment, work must stop immediately, and appropriate management measures, approved by the planning authority, must be implemented. Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes. ENV s2 Between 10 and
14 months after
completion of each
track, a weed
audit must be carried out along the track alignment, and any identified weeds removed
and disposed of to a waste disposal facility. Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes. ENV s3 The location, design
and rehabilitation of
any borrow pits,
must be approved by the planning authority prior to any
borrow pits being
constructed. Reason for condition To conserve
flora, fauna, geological values, and to protect natural processes.
ADVICE Consideration be given to ways of managing the speed of mountain bikers entering O’Grady’s Falls Fire Trail from the new Free Wheel’n’ bike trail.
ADVICE The following advice is provided to you to assist in the implementation of the planning
permit that has been issued subject to the conditions above. The advice is not
exhaustive and you must inform yourself of any other legislation, bylaws, regulations,
codes or standards that will apply to your development under which you may need to obtain
an approval. Visit the Council's website for further information. Prior to any commencement of work on the site or commencement of use the following
additional permits/approval may be required from the Hobart City Council. CONDITION ENDORSEMENT If any condition requires that further documents are submitted and approved, you will
need to submit
the relevant documentation to satisfy the condition via the Condition
Endorsement Submission on Council's online services eplanning portal. Detailed instructions can be found here. A fee of 2% of the value of the works for new public
assets (stormwater infrastructure,
roads and related assets) will apply for the condition endorsement application.
Once approved, the Council will respond to you via email that the condition has been endorsed (satisfied). Where building approval is also required, it is recommended that documentation for
condition endorsement be submitted well before submitting documentation for building
approval. Failure
to address condition endorsement requirements prior to submitting
for building approval may result in unexpected delays. COUNCIL RESERVES A permit
under the Public Spaces Bylaw will be required for these works. An application for a Permit
to Undertake Works can be made here. As part of the permit,
an Environmental Management and Communications Plan must be prepared to the satisfaction of the Director City Amenity. A template for the Environmental
Management and Communications Plan can be provided by the Open Space Planning
Team; call 03 6238 2488.
This plan must be made specific for the trackworks within
Wellington Park. WEED CONTROL Effective measures are detailed in the Tasmanian Washdown Guidelines for Weed
and Disease Control: Machinery, Vehicles and Equipment (Edition 1, 2004). The
guidelines can be obtained from the Department of Primary Industries, Parks, Water
and Environment website. DIAL BEFORE
YOU DIG Click here for dial before you dig information.
|
||||||||||||||
a Mr Nick Sawyer - Deputation Supporting Information - 100 Pinnacle
Road ⇨ b Ms Jane Wilson - Deputation Supporting Information - 100 Pinnacle
Road ⇨ |
Delegation: Committee
7.1.3 7 Hadley Court, Lenah Valley and Adjacent Road Reserve - Two Multiple Dwellings |
||||||||||||||
BEHRAKIS
|
||||||||||||||
That the recommendation contained in the report of the Development Appraisal Planner and the Senior Statutory Planner of 20 August 2021, be adopted. |
||||||||||||||
MOTION CARRIED VOTING RECORD
|
||||||||||||||
COMMITTEE RESOLUTION: |
||||||||||||||
That pursuant to the Hobart Interim Planning Scheme 2015, the City Planning Committee, in accordance with the delegations contained in its terms of reference, approve the application for two multiple dwellings at 7 Hadley Court, Lenah Valley 7008 and adjacent road reserve for the reasons outlined in the officer’s report attached to item 7.1.3 of the Open City Planning Committee agenda of 30 August 2021 and a permit containing the following conditions be issued:
GEN
The use and/or development must be substantially in accordance with the documents and drawings that comprise PLN20221 7 HADLEY COURT LENAH VALLEY TAS 7008 Final Planning Documents except where modified below.
Reason for condition
To clarify the scope of the permit.
TW
The use and/or development must comply with the requirements of TasWater as detailed in the form Submission to Planning Authority Notice, Reference No. TWDA 2020/00484HCC dated 23/04/2020 as attached to the permit.
Reason for condition
To clarify the scope of the permit.
ENG sw6
All stormwater from the proposed development (including hardstand runoff) must be discharged to the Council’s stormwater infrastructure with sufficient receiving capacity prior to first occupation. All costs associated with works required by this condition are to be met by the owner.
Design drawings and calculations of the proposed stormwater drainage and connections to the Council's stormwater infrastructure must be submitted and approved prior to the commencement of work. The design drawings and calculations must:
1. prepared by a suitably qualified person; and
2. include long section(s)/levels and grades to the point of discharge.
All work required by this condition must be undertaken in accordance with the approved design drawings and calculations.
Advice: The applicant is advised to submit detailed design drawings and calculations as part of their Plumbing Permit Application. If detailed design to satisfy this condition is submitted via the planning condition endorsement process there may be fees associated with the assessment, and once approved the applicant will still need to obtain a plumbing permit for the works.
Reason for condition
To ensure that stormwater from the site will be discharged to a suitable Council approved outlet.
SW 7
Prior to occupancy or the commencement of the use (whichever occurs first), any new stormwater connection must be constructed and existing redundant connection(s) be abandoned and sealed at the owner’s expense.
Prior to the issuing of any approval under the Building Act 2016 or commencement of works (whichever occurs first), detailed engineering drawings must be submitted via the City of Hobart’s online request form which is available on its website and approved. The detailed engineering drawings must include:
1. the location of the proposed
connections and all existing connections; 2. the size and design of the connection such that it is appropriate to safely
service the development. The proposed new connection cannot be by PVC in road reserve
as there is no footpath to protect it. The connection
must be by pit and RHS moving into the driveway; 3. the private overland flow path pit connecting to the private drainage
system instead of public connection; 4. longsections of the proposed
connection clearly showing clearances from any nearby services, cover, size, material and delineation of public
and private infrastructure; and 5. connections which are freeflowing gravity driven.
All work required by this condition must be undertaken in accordance with the approved detailed engineering drawings. The approved stormwater connection documents must be included in your plumbing permit application document set and listed in accompanying forms.
SW 11
Measures to minimise impact on the overland flow path from the critical 1% AEP at 2100 event must be installed prior to occupancy or issue of any completion (whichever occurs first).
Detailed engineering drawings accompanied with a report must be submitted as a Condition Endorsement prior to the issue of any approval under the Building Act 2016 or the commencement of work on the site (whichever occurs first). These must include (but are not limited to):
1. details of measures to prevent sediment transport and erosion from
including road reserve; and 2. identification of all measures to maintain and maximise the overland flow path through the site and their maintenance. The real cross sections must be reflected to calculate adequate freeboard (min 300mm) for protection of the subject property and its neighbouring.
All work required by this permit must be undertaken in accordance with the approved detailed drawings and report.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
SW 14
Certification from a registered surveyor that the installation levels/widths of the proposed cutoff drain are at the relevant levels shown on the approved engineering drawings must be provided to the City of Hobart prior to occupancy or commencement of use (whichever occurs first).
ENG 3a
The access driveway, and parking module (parking spaces, aisles and manoeuvring area) must be designed and constructed in accordance with Australian Standard AS/NZS 2890.1:2004 (including the requirement for vehicle safety barriers where required), or a Council approved alternate design certified by a suitably qualified engineer to provide a safe and efficient access, and enable safe, easy and efficient use.
Advice:
It is advised that designers consider the detailed design of the access and parking module prior to finalising the Finished Floor Level (FFL) of the parking spaces (especially if located within a garage incorporated into the dwelling), as failure to do so may result in difficulty complying with this condition.
Reason for condition
To ensure the safety of users of the access and parking module, and compliance with the relevant Australian Standard.
ENG 4
The access driveway and parking module (car parking spaces, aisles and manoeuvring area) approved by this permit must be constructed to a sealed standard (spray seal, asphalt, concrete, pavers or equivalent Council approved) and surface drained to the Council's stormwater infrastructure prior to the first occupation.
Reason for condition
To ensure the safety of users of the access driveway and parking module, and that it does not detract from the amenity of users, adjoining occupiers or the environment by preventing dust, mud and sediment transport.
ENG 1
Any damage to council infrastructure resulting from the implementation of this permit, must, at the discretion of the Council:
1. Be met by the owner by way of reimbursement (cost of repair and
reinstatement to be
paid by the
owner to the
Council); or 2. Be repaired and reinstated by the owner to the satisfaction of the Council.
A photographic record of the Council's infrastructure adjacent to the subject site must be provided to the Council prior to any commencement of works.
A photographic record of the Council’s infrastructure (e.g. existing property service connection points, roads, buildings, stormwater, footpaths, driveway crossovers and nature strips, including if any, preexisting damage) will be relied upon to establish the extent of damage caused to the Council’s infrastructure during construction. In the event that the owner/developer fails to provide to the Council a photographic record of the Council’s infrastructure, then any damage to the Council's infrastructure found on completion of works will be deemed to be the responsibility of the owner.
Reason for condition
To ensure that any of the Council's infrastructure and/or siterelated service connections affected by the proposal will be altered and/or reinstated at the owner’s full cost.
ENG r3
Prior to the commencement of use, the proposed driveway crossover on the Hadley Court highway reservation must be designed and constructed in accordance with:
· Urban TSDR09v3 –
Urban Roads Driveways and TSD R14v3 Type
KC
vehicular crossing; · Footpath Urban Roads Footpaths TSDR11v3.
Design drawings must be submitted and approved as a Condition Endorsement prior to any approval under the Building Act 2016. The design drawings must:
1. Show the cross and long section of
the driveway crossover within the highway reservation and onto the
property; 2. Detail any services or infrastructure (ie light poles, pits, awnings) at or near
the proposed driveway crossover; 3. If the design deviates from the requirements of the TSD, then
demonstrate that a
B85 vehicle or a B99
depending on use
(AS/NZS 2890.1 2004, section 2.6.2), can access the driveway from the road
pavement into the property without scraping the vehicle's
underside; 4. Be prepared and certified by a suitable qualified person, to satisfy the above requirements.
All work required by this condition must be undertaken in accordance with the approved drawings.
Advice: This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Please note that your proposal does not include adjustment of footpath levels. Any adjustment to footpath levels necessary to suit the design of proposed floor, parking module or driveway levels will require separate agreement from Council's Road Services Engineer and may require further planning approvals. It is advised to place a note to this affect on construction drawings for the site and/or other relevant engineering drawings to ensure that contractors are made aware of this requirement.
Reason for condition
To ensure that works will comply with the Council’s standard requirements.
ENV 2
Sediment and erosion control measures, in accordance with an approved soil and water management plan (SWMP), must be installed prior to the commencement of work and maintained until such time as all disturbed areas have been stabilised and/or restored or sealed to the Council’s satisfaction.
A SWMP must be submitted as a Condition Endorsement prior to the issue of any approval under the Building Act 2016 or the commencement of work, whichever occurs first. The SWMP must be prepared in accordance with the Soil and Water Management on Building and Construction Sites fact sheets (Derwent Estuary Program, 2008), available here.
All work required by this condition must be undertaken in accordance with the approved SWMP.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Reason for condition
To avoid the pollution and sedimentation of roads, drains and natural watercourses that could be caused by erosion and runoff from the development.
Part 5 1
Prior to the issue of a building permit, the owner(s) of the property must enter into an agreement with the Council pursuant to Part 5 of the Land Use Planning and Approvals Act 1993 with respect to:
1. Agree to maintain all approved flood mitigation measures and conveyance measures as per the design drawings.
All costs for the preparation and registration of the Part 5 Agreement must be met by the owner.
The owner must comply with the Part 5 Agreement which will be placed on the property title.
Advice:
Further information with respect to the preparation of a part 5 agreement can be found http://www.hobartcity.com.au/Development/Planning/Part_5_agreements
Reason for condition
To ensure that the risk from the overland flow path is appropriately managed.
ADVICE
The following advice is provided to you to assist in the implementation of the planning permit that has been issued subject to the conditions above. The advice is not exhaustive and you must inform yourself of any other legislation, bylaws, regulations, codes or standards that will apply to your development under which you may need to obtain an approval. Visit the Council's website for further information.
Prior to any commencement of work on the site or commencement of use the following additional permits/approval may be required from the Hobart City Council.
CONDITION ENDORSEMENT
If any condition requires that further documents are submitted and approved, you will need to submit the relevant documentation to satisfy the condition via the Condition Endorsement Submission on Council's online services eplanning portal. Detailed instructions can be found here.
A fee of 2% of the value of the works for new public assets (stormwater infrastructure, roads and related assets) will apply for the condition endorsement application.
Once approved, the Council will respond to you via email that the condition has been endorsed (satisfied).
Where building approval is also required, it is recommended that documentation for condition endorsement be submitted well before submitting documentation for building approval. Failure to address condition endorsement requirements prior to submitting for building approval may result in unexpected delays.
BUILDING PERMIT
You may need building approval in accordance with the Building Act 2016. Click here for more information.
This is a Discretionary Planning Permit issued in accordance with section 57 of the Land Use Planning and Approvals Act 1993.
PLUMBING PERMIT
You may need plumbing approval in accordance with the Building Act 2016, Building Regulations 2016 and the National Construction Code. Click here for more information.
OCCUPATION OF THE PUBLIC HIGHWAY
You may require a Permit to Open Up and Temporarily Occupy a Highway (for work in the road reserve). Click here for more information.
STORMWATER
The applicant may require to obtain written consent from the City of Hobart for works involving or in proximity of service easements.
WORK WITHIN THE HIGHWAY RESERVATION
Please note development must be in accordance with the Hobart City Council’s Infrastructure By law. Click here for more information.
DRIVEWAY SURFACING OVER HIGHWAY RESERVATION
If a coloured or textured surface is used for the driveway access within the Highway Reservation, the Council or other service provider will not match this on any reinstatement of the driveway access within the Highway Reservation required in the future.
REDUNDANT CROSSOVERS
Redundant crossovers are required to be reinstated under the Hobart City Council’s Infrastructure By law. Click here for more information.
ACCESS
Designed in accordance with LGAT IPWEA – Tasmanian standard drawings. Click here for more information.
CROSS OVER CONSTRUCTION
The construction of the crossover can be undertaken by the Council or by a private contractor, subject to Council approval of the design. Click here for more information.
PRIVATE COVENANTS
Please be advised that this property is subject to covenants contained within the schedule of easements.
The approved development may require consent and/or a modification to the covenant to ensure it is undertaken lawfully. You must not act on this planning permit until you have obtained any necessary consent or modification to the covenant which is required for the approved development.
If you proceed with the development inconsistent with the terms of the covenant, the parties with the benefit of the covenant may be entitled to make an application in the Courts to restrain a breach. The grant of this planning permit does not constitute a waiver, modification or release of the terms of the covenant nor approval under the terms of the covenant to undertake the proposed development.
WEED CONTROL
Effective measures are detailed in the Tasmanian Washdown Guidelines for Weed and Disease Control: Machinery, Vehicles and Equipment (Edition 1, 2004). The guidelines can be obtained from the Department of Primary Industries, Parks, Water and Environment website.
WORK PLACE HEALTH AND SAFETY
Appropriate occupational health and safety measures must be employed during the works to minimise direct human exposure to potentiallycontaminated soil, water, dust and vapours. Click here for more information.
NOISE REGULATIONS
Click here for information with respect to noise nuisances in residential areas.
WASTE DISPOSAL
It is recommended that the developer liaise with the Council’s Cleansing and Solid Waste Unit regarding reducing, reusing and recycling materials associated with demolition on the site to minimise solid waste being directed to landfill.
Further information regarding waste disposal can also be found on the Council’s website.
FEES AND CHARGES
Click here for information on the Council's fees and charges.
DIAL BEFORE YOU DIG
Click here for dial before you dig information.
|
Delegation: Committee
7.1.4 34 Wellesley Street, South Hobart - Partial Demolition and Ancillary Dwelling |
||||||||||||
HARVEY
|
||||||||||||
That the recommendation contained in the report of the Development Appraisal Planner and the Senior Statutory Planner of 24 August 2021, be adopted. |
||||||||||||
MOTION CARRIED VOTING RECORD
|
||||||||||||
COMMITTEE RESOLUTION: |
||||||||||||
That pursuant to the Hobart Interim Planning Scheme 2015, the City Planning Committee, in accordance with the delegations contained in its terms of reference, approve the application for partial demolition and ancillary dwelling, at 34 Wellesley Street, South Hobart 7004 for the reasons outlined in the officer’s report attached to item 7.1.4 of the Open City Planning Committee agenda of 30 August 2021 and a permit containing the following conditions be issued:
GEN
The use and/or development must be substantially in accordance with the documents and drawings that comprise PLN21438 34 WELLESLEY STREET SOUTH HOBART TAS 7004 Final Planning Documents, except where modified below.
Reason for condition
To clarify the scope of the permit.
ENG sw1
All stormwater from the proposed development (including but not limited to: roofed areas, ag drains, retaining wall ag drains and impervious surfaces such as driveways and paved areas) must be drained to the Council’s stormwater infrastructure prior to first occupation or commencement of use (whichever occurs first).
Any private or private shared stormwater system passing through thirdparty land must have sufficient receiving capacity.
Advice:
Under section 23 of the Urban Drainage Act 2013 it is an offence for a property owner to direct stormwater onto a neighbouring property.
Reason for condition
To ensure that stormwater from the site will be discharged to a suitable Council approved outlet.
ENG 2a
Prior to first occupation or commencement of use (whichever occurs first), vehicular barriers compliant with the Australian Standard AS/NZS 1170.1:2002 must be installed to prevent vehicles running off the edge of an access driveway or parking module (parking spaces, aisles and manoeuvring area) where the drop from the edge of the trafficable area to a lower level is 600mm or greater, and wheel stops (kerb) must be installed for drops between 150mm and 600mm. Barriers must not limit the width of the driveway access or parking and turning areas approved under the permit.
Advice:
The Council does not consider a slope greater than 1 in 4 to constitute a lower level as described in AS/NZS 2890.1:2004 Section 2.4.5.3. Slopes greater than 1 in 4 will require a vehicular barrier or wheel stop.
Designers are advised to consult the National Construction Code 2016 to determine if pedestrian handrails or safety barriers compliant with the NCC2016 are also required in the parking module this area may be considered as a path of access to a building.
Reason for condition
To ensure the safety of users of the access driveway and parking module and compliance with the standard.
ENG 3a
The access driveway, and parking module (parking spaces, aisles and manoeuvring area) must be designed and constructed in accordance with Australian Standard AS/NZS 2890.1:2004 (including the requirement for vehicle safety barriers where required), or a Council approved alternate design certified by a suitably qualified engineer to provide a safe and efficient access, and enable safe, easy and efficient use.
Reason for condition
To ensure the safety of users of the access and parking module, and compliance with the relevant Australian Standard.
ENG 4
The access driveway and parking module (car parking spaces, aisles and manoeuvring area) approved by this permit must be constructed to a sealed standard (spray seal, asphalt, concrete, pavers or equivalent Council approved) and surface drained to the Council's stormwater infrastructure prior to the commencement of use.
Reason for condition
To ensure the safety of users of the access driveway and parking module, and that it does not detract from the amenity of users, adjoining occupiers or the environment by preventing dust, mud and sediment transport.
ENG 1
Any damage to council infrastructure resulting from the implementation of this permit, must, at the discretion of the Council:
1. Be met by the owner
by way of reimbursement (cost of repair and
reinstatement to be
paid by the
owner to the
Council); or 2. Be repaired and reinstated by the owner to the satisfaction of the Council.
A photographic record of the Council's infrastructure adjacent to the subject site must be provided to the Council prior to any commencement of works.
A photographic record of the Council’s infrastructure (e.g. existing property service connection points, roads, buildings, stormwater, footpaths, driveway crossovers and nature strips, including if any, preexisting damage) will be relied upon to establish the extent of damage caused to the Council’s infrastructure during construction. In the event that the owner/developer fails to provide to the Council a photographic record of the Council’s infrastructure, then any damage to the Council's infrastructure found on completion of works will be deemed to be the responsibility of the owner.
Reason for condition
To ensure that any of the Council's infrastructure and/or siterelated service connections affected by the proposal will be altered and/or reinstated at the owner’s full cost.
ENV 1
Sediment and erosion control measures sufficient to prevent sediment from leaving the site must be installed prior to any disturbance of the site, and maintained until all areas of disturbance have been stabilized or revegetated.
Advice:
For further guidance in preparing a Soil and Water Management Plan – in accordance with Fact sheet 3 Derwent Estuary Program click here.
Reason for condition
To avoid the sedimentation of roads, drains, natural watercourses, Council land that could be caused by erosion and runoff from the development, and to comply with relevant State legislation.
HER 17a
The palette of exterior colours must reflect the palette of building colours within the local streetscape and precinct.
Prior to the issue of any approval under the Building Act 2016, revised plans must be submitted and approved as a Condition Endorsement showing exterior colours of all external materials including decking and privacy screening in accordance with the above requirement.
All work required by this condition must be undertaken in accordance with the approved plans.
Advice:
This condition requires further information to be submitted as a Condition Endorsement. Refer to the Condition Endorsement advice at the end of this permit.
Reason for condition
To ensure that development at a heritage precinct is undertaken in a sympathetic manner which does not cause loss of historic cultural heritage significance.
ADVICE
The following advice is provided to you to assist in the implementation of the planning permit that has been issued subject to the conditions above. The advice is not exhaustive and you must inform yourself of any other legislation, bylaws, regulations, codes or standards that will apply to your development under which you may need to obtain an approval. Visit the Council's website for further information.
Prior to any commencement of work on the site or commencement of use the following additional permits/approval may be required from the Hobart City Council.
CONDITION ENDORSEMENT
If any condition requires that further documents are submitted and approved, you will need to submit the relevant documentation to satisfy the condition via the Condition Endorsement Submission on Council's online services eplanning portal. Detailed instructions can be found here.
A fee of 2% of the value of the works for new public assets (stormwater infrastructure, roads and related assets) will apply for the condition endorsement application.
Once approved, the Council will respond to you via email that the condition has been endorsed (satisfied).
Where building approval is also required, it is recommended that documentation for condition endorsement be submitted well before submitting documentation for building approval. Failure to address condition endorsement requirements prior to submitting for building approval may result in unexpected delays.
BUILDING PERMIT
You may need building approval in accordance with the Building Act 2016. Click here for more information.
This is a Discretionary Planning Permit issued in accordance with section 57 of the Land Use Planning and Approvals Act 1993.
PLUMBING PERMIT
You may need plumbing approval in accordance with the Building Act 2016, Building Regulations 2016 and the National Construction Code. Click here for more information.
PLANNING
It is noted that ancillary dwellings must share all access and services with the main dwelling. This would include garbage collection. As such, the separate bin storage for the ancillary dwelling is not required and could instead be a space for shared bins between the main and ancillary dwelling, or replaced with a gate to access the rear yard of the main dwelling, or omitted altogether. These alternatives would be considered as substantially in accordance with the approved plans if show on plans submitted for building approval.
STORMWATER
Please note that in addition to a building and/or plumbing permit, development must be in accordance with the Hobart City Council’s Infrastructure By law. Click here for more information.
NOISE REGULATIONS
Click here for information with respect to noise nuisances in residential areas.
WASTE DISPOSAL
It is recommended that the developer liaise with the Council’s Cleansing and Solid Waste Unit regarding reducing, reusing and recycling materials associated with demolition on the site to minimise solid waste being directed to landfill.
Further information regarding waste disposal can also be found on the Council’s website.
FEES AND CHARGES
Click here for information on the Council's fees and charges.
DIAL BEFORE YOU DIG
Click here for dial before you dig information.
|
Delegation: Committee
8. Reports
Delegation: Committee
DUTTA
|
||||||||||||||
That the recommendation contained in the memorandum of the Director City Planning of 24 August 2021, be adopted. |
||||||||||||||
MOTION CARRIED VOTING RECORD
|
||||||||||||||
COMMITTEE RESOLUTION: |
||||||||||||||
That the information contained in the memorandum City Planning – Advertising Report be received and noted.
|
Delegation: Committee
9. Committee Action Status Report
BRISCOE
|
||||||||||||||
That the recommendation contained in the memorandum of the Administrative Officer of 25 August 2021, be adopted. |
||||||||||||||
MOTION CARRIED VOTING RECORD
|
||||||||||||||
COMMITTEE RESOLUTION: |
||||||||||||||
That the information be received and noted.
|
Delegation: Committee
Section 29 of the Local Government (Meeting Procedures) Regulations 2015.
File Ref: 13-1-10
10.1 Alderman Behrakis - Short Stay Permits / Residential Dwellings File Ref: 13-1-10 |
|
|
Question: Can the Director advise on the number of new short stay accommodation permits issued in the past 12 months and of the number of residential dwellings rejected by the Council in the past 12 months ? Answer: The Director City Planning advised that 39 short stay visitor accommodation permits have been issued in the past 12 months and there were 4 applications amounting to 92 dwellings that were not approved by the Council in the past 12 months.
|
10.2 Councillor Harvey - Ancillary Dwellings File Ref: 13-1-10 |
|
|
Question: Can the Director advise how many ancillary dwellings have been approved in Hobart in the last 12 months ?
Answer: The Director City Planning took the question on notice.
|
10.3 Councillor Coats - Representations - Deputations File Ref: 13-1-10 |
|
|
Question: Can the Director advise the process with regards representations received and their publishing status ?
Answer: The Director City Planning advised that representations are provided in full to Elected Members only to assist with their consideration of development applications and don’t form part of the agenda documentation.
|
10.4 Deputy Lord Mayor - Building Surveyors - Professional Standards Scheme File Ref: 13-1-10 |
|
|
Question: Can the Director advise what Council can expect from Building Surveyors under the newly approved Professional Standards Scheme for Building Surveyors, which commenced on 1 July 2021. It is understood this scheme will operate across all states and territories. It would be beneficial to understand how local government will be affected and how best we can support the changes ?
Answer: The Director City Planning took the question on notice.
|
BEHRAKIS
|
||||||||||||||
That the Committee resolve by majority that the meeting be closed to the public pursuant to regulation 15(1) of the Local Government (Meeting Procedures) Regulations 2015 because the items included on the closed agenda contain the following matters:
· Confirm the minutes of the Closed portion of the meeting · Questions without notice in the Closed portion
The following items were discussed:-
Item No. 1 Minutes of the last meeting of the Closed Portion of the Committee Meeting Item No. 2 Consideration of supplementary items to the agenda Item No. 3 Indications of pecuniary and conflicts of interest Item No. 4 Questions Without Notice
|
||||||||||||||
MOTION CARRIED VOTING RECORD
|
Delegation: Committee
There being no further business the Open portion of the meeting closed at 7.01pm.
TAKEN AS READ AND SIGNED AS A CORRECT RECORD
THIS
13th DAY OF SEPTEMBER 2021.
CHAIRMAN